Our series is designed for top printing, providing excellent gloss.
Printing Type
Flexographic Printing
Printing Materials
Low- and High-Density Polyethylene (LDPE-HDPE), aluminum foil, corex, metallized OPP (primed), BOPP, OPP, pearlescent OPP film, paper, and cardboard.
Series Features
-
Excellent gloss
-
Outstanding printability
-
High abrasion resistance
-
Heat resistance: 130–140°C
-
Suitable for top printing
-
Not suitable for lamination
Usage Instructions
-
Thinner: Isopropyl Alcohol (or Ethyl Alcohol) 80% + Ethyl Acetate 20%
-
Retarder: Methoxypropanol or Ethoxypropanol
-
Accelerator: Ethyl Acetate
-
Varnish: Use top print ink varnish as a color reducer
Additional Information
-
The film to be printed should have a minimum corona of 38 dyn/cm.
-
Recommended anilox values: 80–200 lines/cm²
-
Designed for top printing; therefore, scratch and abrasion resistance is high.
-
series inks must not be used for rotogravure or lamination processes.
-
Scratch and abrasion resistance can be further enhanced by adding 0.5–1% top print additive to the ink mixture.
-
To maintain ink durability, it is recommended to use a solvent + varnish mixture during thinning.
-
Color options for this series are prepared according to Pantone, RAL, or customer sample.
-
Mix the product thoroughly before use. Do not mix with other series products.
-
To avoid viscosity and color issues, store inks between 20–25°C.
-
Storage temperature: room temperature; maximum shelf life is 1 year from the production date.
