Our series is suitable for reverse printing and lamination applications.
Printing Type
Flexographic Printing
Printing Materials
Low-Density and High-Density Polyethylene (LDPE-HDPE), BOPP, OPP, coex, pearlescent OPP film, aluminum foil, metallized OPP (primed), paper, and cardboard.
Series Features
-
Excellent gloss
-
Low solvent carrier content
-
Heat resistance: 150–160°C
-
Compatible with solvent-based and solvent-free adhesives for lamination
-
Suitable for reverse printing and lamination
Usage Instructions
-
Thinner: Isopropyl alcohol (or ethyl alcohol) 80% + ethyl acetate 20%
-
Retarder: Methoxypropanol or Ethoxypropanol
-
Accelerator: Ethyl acetate
-
Varnish: Use lamination print ink varnish as a color reducer
Additional Information
-
The film to be printed should have a minimum corona of 38 dyn/cm.
-
Recommended anilox values: 80–400 lines/cm²
-
This series is designed for reverse printing and lamination; therefore, it has no scratch or abrasion resistance.
-
For top-print applications, scratch and abrasion resistance can be increased by adding 3-4% additive to the ink mixture.
-
Inks with top-print additives must not be used in lamination processes.
-
Lamination adhesion can be improved by adding 3–5% lamination adhesion promoter to enhance heat resistance and adhesion.
-
For laminated jobs, the retarder ratio must be properly adjusted; otherwise, lamination issues may occur.
-
To maintain ink durability, it is recommended to use a solvent + varnish mixture during thinning.
-
Mix the product thoroughly before use. Do not mix with other series products.
-
To avoid viscosity and color issues, store inks between 20–25°C.
-
Color options for this series are prepared according to Pantone, RAL, or customer sample.
-
Storage temperature: room temperature; maximum shelf life is 1 year from the production date.
