Applied over top print applications to achieve a matte effect.
Printing Type
Flexographic and Rotogravure
Printing Materials
Low- and High-Density Polyethylene (LDPE-HDPE), Aluminum foil, Metallized OPP (primed), Corex, Pearlescent film
Series Features
Usage Instructions
-
Thinner: Isopropyl Alcohol (or Ethyl Alcohol) 80% + Ethyl Acetate 20%
-
Retarder: Methoxypropanol or Ethoxypropanol
-
Accelerator: Ethyl Acetate
Additional Information
-
The film to be printed should have a minimum corona of 38 dyn/cm.
-
Apply as the final layer in the last chamber of the printing press.
-
Very little alcohol mixture is needed during printing; viscosity is similar to varnish viscosity.
-
Designed to achieve a matte appearance on top-printed surfaces; therefore, scratch and abrasion resistance is sufficient.
-
Mix the product thoroughly before use. Do not mix with other series products.
-
Storage temperature: room temperature; maximum shelf life is 1 year from the production date.
